Monday, 14 September 2015
exhaust
This is 4 photos of my first exhaust as you can see it is a constant battle with room for all the parts.It is constructed from stainless steel 304 tig welded pre formed elbows sea
on eBay you can purchase 45 and 90 degree bends that mack the gob so much better.
all the pipe is 38mm for the headers and 75mm for the tail pipe with alloy flanges.
the bottom picture shows the thermal sensors and the Turbo tucked in tight against the oil filter and engine
Tuesday, 8 September 2015
Exhaust manifold and Turbo . . .
Today I started on my second exhaust manifold for the 2nd engine. first I had to fit the Turbocharger to the Engine with a 20mm adaptor plate. This was a bit of hard work cutting milling and filing to get the right shape.
anyway it all fits now and the reason for a 20mm plate is the waste gate pivot that I will put in when I am shore of the right place.
Today I started on my second exhaust manifold for the 2nd engine. first I had to fit the Turbocharger to the Engine with a 20mm adaptor plate. This was a bit of hard work cutting milling and filing to get the right shape.
anyway it all fits now and the reason for a 20mm plate is the waste gate pivot that I will put in when I am shore of the right place.
Sunday, 6 September 2015
This tube is from the Turbocharger to the Ice intercooler. I had to solder 2 tubes into the main tube one for the air temp sensor and the other to the dump valve. All this work had been finished and then I realized that the air temp sensor would create a lot of drag in the original position so today it was moved to the inner side of the tube
Wednesday, 2 September 2015
This photo is of the 6th gear light that will reminded me that I am in 6th. it could be so easy to go flat out in 5th by mistake what you need to remember is there is nothing to judge your speed to get a idea
what it will be like the turbocharged Engine screaming your hear down and the view you will see imagine if you sat on the beech looking out to sea absolutely nothing in your way just marker flags every 1/4 mile
this light is activated through the Motec ECU and the gear position sensor this sensor is one we adapt from a standard Yamaha neutral switch and it will indicate to the ECU all 6 gears
the light consists of 3 neon lights 1 stainless steel tube a plug and some wire
you will have to excuse my spelling it can be bad but I hope you can work around this
what it will be like the turbocharged Engine screaming your hear down and the view you will see imagine if you sat on the beech looking out to sea absolutely nothing in your way just marker flags every 1/4 mile
this light is activated through the Motec ECU and the gear position sensor this sensor is one we adapt from a standard Yamaha neutral switch and it will indicate to the ECU all 6 gears
the light consists of 3 neon lights 1 stainless steel tube a plug and some wire
you will have to excuse my spelling it can be bad but I hope you can work around this
Subscribe to:
Posts (Atom)